Last Updated on September 16, 2022
Cerakoting a pistol can dramatically improve the appearance of your gun. But what should you look for when you decide to go through the process? In this article, we will discuss the benefits, cost, and requirements for cerakoting. Once you understand the process, you will be well on your way to customizing your weapon. You can even choose to cerakote an old one to add an extra special touch.
If you’re interested in customizing your firearm, you may be wondering how much it costs to cerakote a pistol. There are a few different ways to go about this, and the cost will depend on the type of finish you want. A few different options include a Black Oxide coating, Parkerizing finish, or a combination of both. The final cost will depend on the desired look and the services you’d like performed.
Cerakote finishes are extremely durable, and can withstand more than 5,000 wear cycles per mil. The Tabor wear test involves running a steel plate against an 8-inch abrasive wheel. The Cerakote coating’s Coefficient of Friction is 80% lower than that of stainless steel against stainless steel. That means your product will last longer. If you’re interested in a specific pattern, you can customize it yourself, saving money on a custom finish.
If you’re interested in protecting your gun from rust and corrosion, a Cerakote coating is a good choice. The coating’s thin and durable design protects the moving parts of a pistol and also repels water and sand, making it much more resistant to corrosion than traditional finishes. What’s more, Cerakote prevents rust and pitting as well, making it a far better choice for a pistol than other finishes.
The application of cerakote is an intricate process, requiring a thorough disassembly of the firearm. To apply the coating, it must be stripped of all parts and blasted with garnet sand to remove any oils that may cause functional problems in the future. Once all components are clean, the gun must be dried in an oven at 250 degrees. If a mistake is made, the coating won’t adhere properly and the gun will cease to function.
Guns are usually made of metal, making it easy for them to sustain physical damages. Cerakote is a scientific substance composed of ceramic and polymer components that protect firearms from such physical damage. While it may not look flashy, gun users have been tired of the black-and-grey looks of traditional handguns, and are now experimenting with flashy cerakote finishes.
The process of applying Cerakote is complicated, requiring an applicator with specialized knowledge and equipment. Nevertheless, if you choose a professional, you can be assured that you will be able to use your gun for many years to come. And, with the right care, it will stand up to the test of time. And you can even use it to protect your handgun. It is recommended that you buy a new gun before applying a Cerakote to it.
If you want to add a unique and aesthetically pleasing touch to your pistol, you might be wondering how much it would cost to cerakote it. Unlike most finishes, Cerakote is made to withstand the harsh elements of salt water and humidity. The coating can be applied to a wide range of firearms, from handguns to shotguns, and comes in several colors to choose from.
Cerakote services can be performed at Midwest Gun Works or a custom shop. Regardless of the location, you should request a Customer Work Authorization Form from the service. This document outlines the scope of services, including the cost, shipping method, and certification that the job has been logged in the FFL log book. Cerakote services may not be appropriate for firearms that are damaged due to rust, pitting, or scratches. Also, make sure that the service will not attempt to Cerakote internal moving parts, such as screws or barrels. Firearms are designed to have specific tolerances, and these tolerances may affect the finish.
Before cerakoting a pistol, you should know the requirements. The thickness of the film is a primary consideration, but you can choose a different series based on other properties, like durability. If you want to avoid problems like sloppy slide-to-receiver mating, you can try a thinner film. Additionally, you can use a different Cerakote finish if the gun has internal components that are extremely tight.
First, your firearm must be completely disassembled. This is necessary for the coating process, because polymer parts, springs, and other small parts may be damaged by the heat. Another consideration is the size of each part you’d like to coat. While cerakoting is a good option for corrosion resistance and matching aesthetics, it can also be a time consuming process. Regardless, it’s worth the effort and expense.
First, make sure your firearm is compatible with the application process. Cerakote is applied with a HLVP spray gun. Because this process requires some finesse, you need to be sure to apply the finish with the proper thickness. Ensure that it’s not too thick because it will interfere with the gun’s operation. Then, you need to apply a protective layer of Cerakote to the metal parts. This protective layer dries on the metal parts, and the polymer components will be cured in an oven at 150 to 180 degrees.
After you’ve made the decision to apply a cerakote finish to your gun, you’ll need to surrender your pistol to a custom shop. Luckily, you can get this done for less than $100 if you purchase your gun from a manufacturer. Cerakote is a great way to improve your pistol’s appearance and protect it. The process will make your pistol look great and increase its performance – and your wallet!
About The Author
Wendy Lee is a pop culture ninja who knows all the latest trends and gossip. She's also an animal lover, and will be friends with any creature that crosses her path. Wendy is an expert writer and can tackle any subject with ease. But most of all, she loves to travel - and she's not afraid to evangelize about it to anyone who'll listen! Wendy enjoys all kinds of Asian food and cultures, and she considers herself a bit of a ninja when it comes to eating spicy foods.