The Nardi horn button is made of plastic or metal. The button connects the horn to the horn wire on the steering column. Then, simply reinstall the horn button and enjoy your new, loud horn! This article will show you how to install this button on your car. You can follow the steps listed below:
How to dismantle a Nardi horn button? This simple guide will show you how to remove the button from your Nardi wheel. These buttons have circular bosses surrounded by fake allen key bolts. After you remove the pigtails, you can then ground the internal portion of the button to the frame. If you’re unable to locate a compatible source, you can search for instructions in the forum section.
The horn button is attached to a wire running down the steering column. The negative charge from the battery travels the outter tube to the horn connector, then into the steering column wire. The horn has a constant 12V + and neg to complete the circuit. To remove the horn button, turn off the ignition. The wire running down the steering column to the nardi horn button should be insulated from ground.
Nardi horn buttons are typically made from plastic. They come apart easily. To remove the button, disconnect the negative battery terminal. Then, remove the clock spring and brackets that hold the lighting and wiper stalks. The wiring from the steering column to the horn button should be connected to the pos (+) terminal on the horn. After that, connect the signal wire to the center terminal of the nardi horn button.
How to reinstall a nardi horn button on a motorcycle is quite simple. First, you should remove the horn button from your steering wheel and attach it to the hub. Then, you should connect the power wire to the hub adapter by attaching the center tab on the back of the horn button. The power wire should be labeled P for power. You can use pliers to tighten the zip tie.
The horn and turn signals work just fine after the reinstall. The pigtails are connected to smaller allen screws. Also, it is possible to unscrew the button and ground it internally to the frame. If you can’t find a suitable source of media, you can ask a fellow nardi wheel owner for help. In some cases, you may find a solution posted by a Nardi wheel owner.
About The Author
Mindy Vu is a part time shoe model and professional mum. She loves to cook and has been proclaimed the best cook in the world by her friends and family. She adores her pet dog Twinkie, and is happily married to her books.