How to Adjust Trigger on TC Compass

8 mins read

Last Updated on September 16, 2022

If you’re wondering how to adjust the trigger on your Thompson/Center Compass pistol, you’ve come to the right place. This firearm features a simple, three-nut trigger system that allows you to adjust the trigger’s pull weight from 3.5 to five pounds. You can adjust this weight using the owner’s manual to suit your particular needs. The trigger has no over-travel or creep, and three different nuts allow you to fine-tune it.

Keeping barrel and stock separate

One of the most important aspects of accuracy is consistency. A TC compass is no different. Its 5R rifling limits bullet deformation. The barreled action uses pillar bedding for stability. It also has a synthetic stock with a fully integrated trigger guard, an extended cheek plate, and sling studs. A recent redesign of the Compass included a detachable magazine that slid flush with the stock and was easy to reach.

When adjusting the trigger on a TC compass, it’s best to keep the barrel and stock separated. This will prevent the trigger from being cocked too early. If you want to achieve tighter groups, the stock should be placed on a front rest. This can cause the trigger to lock. To prevent this problem, it’s a good idea to place a small piece of plastic between the bottom of the receiver ring and the stock bedding.

The process of adjusting the trigger is relatively simple. First, you’ll need to remove the barreled action from the stock. Then, you’ll need a set of 1/4” open end wrenches to adjust the trigger. A manual will also help you keep the barrel and stock separate while adjusting the trigger. Once the trigger is adjusted, you’ll want to tighten the lock nut.

After you’ve adjusted the trigger, you’ll need to tighten the bolt a little. This step is especially crucial when adjusting the trigger on a TC compass. The T/C threads the muzzle of the Compass hunting rifle. Once this is done, you’ll be ready to shoot one-inch groups at 100 yards. Its accuracy has been well-documented, with six different factory loads proving to be reliable and accurate.

If you’re looking for an affordable, reliable rifle, consider the TC compass. It’s one of the most affordable options available, and a solid, durable rifle. Its design is “timeless” and works well. Moreover, it produces impressive shooting results. Although a TC compass is a basic model, you can easily modify it to fit your requirements.

The recoil lug on the Compass is a little different than other rifles. Most rifles feature a recoil lug built into the bottom of the receiver ring, while the lug on a TC compass is wedged between the barrel and the front of the stock. The lug, however, locks into the stock.

Keeping trigger springs separate

Keeping trigger springs separate on a Thompson Center compass rifle is essential for proper trigger function. While the factory produces some excellent rifles, their triggers are lacking true performance. Thankfully, there’s a cheap, easy way to fix this issue. The Trigger Job Spring Kit by Thompson Center is a great solution. In the following paragraphs, we’ll look at how to install a trigger job spring kit.

T/C Arms provides its Compass rifle in ten chamberings and a left-handed option. The company has been able to capitalize on the trend towards higher-quality hunting rifles while keeping the price reasonable. This rifle comes with a TC threaded muzzle. Trigger springs are also separate in the TC compass. You must remove both trigger springs before installing them on the rifle.

Thompson/Center is an American gun manufacturer. Founded in 1967, Thompson/Center advertises uncompromising design and quality materials. Their guns are reliable in function and are backed by a lifetime warranty in the US. They provided a test model for us to review. While the compass lacks a lot of frills and gimmicks, it is a practical option for a newcomer to the world of hunting rifles.

The Compass has a different recoil lug than most rifles. Most rifles feature a recoil lug that is integrated into the bottom of the receiver ring, while the Compass has one on the front side and is a recessed section in the stock. When the bolt is pulled back, the plunger pushes out cartridges from the ejection port.

Getting the most performance out of a tc compass

Setting the trigger on a T/C Compass rifle is the key to achieving sub-MOA accuracy. It’s important to keep in mind that you may lose the center of the shot by pulling on the bolt too quickly or yanking on it. There are several methods to achieve this, but the most important one is to know what trigger setting works best for your specific rifle.

The Compass is an American-made rifle that comes with a threaded barrel. The suggested retail price for this rifle is $399. It is possible to find it for much less if you know where to look. Whether you choose to buy a new or used Compass rifle, be sure to read the instructions carefully before making the purchase.

The main trigger return spring kit comes with four custom-made springs. These springs come in 1.5-lb and 2.5-lb weights. They are available in various configurations and come with unlimited or limited drop test ratings. Whichever you choose, they will reduce your T/C Compass’s trigger pull from stock to a modified 2.5 pounds in no time.

Setting trigger is an essential part of shooting a TC Compass. By using the proper trigger, you’ll be able to obtain the desired level of accuracy and consistency. When setting trigger, remember to keep in mind the type of shooting you do. Ruger American, Ruger, and TC Compass rifles all have adjustable trigger pulls. If you want to shoot a bolt action rifle, you’ll probably prefer the Ruger American. It’s lightweight and has superior accuracy.

When it comes to shooting with a T/C Compass, one of its best features is the single-stage trigger. You can adjust the trigger weight and pull rate, depending on your comfort level. The 5R rifling in the barrel ensures consistent accuracy. With Thompson/Center’s MOA guarantee, you can expect to shoot a one-inch three-shot group at 100 yards or less.

About The Author

Wendy Lee is a pop culture ninja who knows all the latest trends and gossip. She's also an animal lover, and will be friends with any creature that crosses her path. Wendy is an expert writer and can tackle any subject with ease. But most of all, she loves to travel - and she's not afraid to evangelize about it to anyone who'll listen! Wendy enjoys all kinds of Asian food and cultures, and she considers herself a bit of a ninja when it comes to eating spicy foods.