How to Bind an RC Plane

11 mins read

Last Updated on September 16, 2022

Having trouble flying your RC airplane or helicopter? If so, you need to learn how to bind an rc airplane. Here are some ways to do it. Firstly, you need to check the power failsafe setting on your radio. Make sure this is set to ‘High’ or ‘Low’. This setting ensures the radio does not transmit power to the model. Secondly, you need to set the SAFE Select switch. Once you have done this, you can begin to bind your aircraft.

Motor power failsafe setting

Before flying your radio-controlled plane, be sure to turn off the transmitter, disable the battery, and check the motor power failsafe setting. The motor should shut down automatically if the RF connection fails. Before flying your plane, you should bench-test the failsafe system by turning the TX on and off and restrain it. If the motors do not shut down when the radio link is lost, the motor should stop. This setting is also legally required in the UK.

Generally, electric models can be restarted without any problems. However, you should make sure that the throttle failsafe setting is set to 1500 or less. Depending on the model’s altitude, you might want more or less time to return to the runway safely. Also, the failsafe setting should match the throttle level when landing. If the failure happens when the link is lost, the aircraft will immediately disarm and stop flying.

A failsafe setting that will protect your RC plane if it loses power is called the RC Loss Failsafe. It will cause the receiver to drop to the lowest throttle value. This triggering action will cause the autopilot to enter a short failsafe mode called “Circle” mode. If the RC signal is recovered, the motor will resume and the plane will fly back to the previous mode.

Using SAFE Select to bind a rc plane

Activate the SAFE Select option during a bind. To do so, first remove the bind plug from the receiver. SAFE Select will now be available every time the airplane is powered on. The airplane will indicate its mode of operation by cycling its surfaces. Activate SAFE Select if you’re using a dual rate switch. Otherwise, turn off the switch and let the airplane bind itself automatically.

Enabling SAFE Select will also protect the airplane during critical flight phases. In an emergency, it will enable the righting mechanism of the plane. For a new airplane, it will prevent from falling into trouble during the maiden phase. If you don’t want to go through the hassle of programming the SAFE Select function, you can just use the normal binding sequence of the receiver.

Although SAFE makes RC safer and more accessible to more people, it should be viewed as an adjunct to flight training. For newbies, it will be helpful to check out local RC clubs with flight instructors. While this is an excellent supplement to flight training, SAFE is no replacement for professional instruction. If you want to learn to fly without using SAFE, you should seek out a qualified instructor and learn to fly without any aids.

Using Spektrum DX6e

The Spektrum DX6e is a six-channel radio that is part of the (e)conomy line. It is a versatile and easy-to-use device that comes with a two-year warranty. The transmitter comes with an AR620 sport receiver, which caters to DSMX/SM2 technologies and can accommodate multiple RC plane models.

The DX6e is compatible with Horizon airplanes that use Spektrum bind and fly setups. Its 2.4-GHz frequency makes it compatible with most DSM transmitters. The receiver uses an amplified antenna to receive signals. The transmitter remains secured on the aircraft. Spektrum transmitters are also compatible with many Bind-N-Fly aircraft.

The DX6i works with all current Spektrum receivers. However, it does not work with other models. The AR6200 receiver is required. The distance between the transmitter and receiver is approximately one-hundred meters. In addition to its 2.4GHz capabilities, the DX6e has a model-match feature that allows you to program the transmitter to operate with a specific model of aircraft.

Unlike many other 2.4GHz transmitters, the DX6e is compatible with most RC planes. Its six channels make it easy to bind and fly RC planes. It also comes with memory slots for up to 250 aircraft, meaning that you can fly as many as you like with the same transmitter. Additionally, the DX6e also eliminates the need for transmitter batteries and can be used for multiple RC planes at the same time.

Futaba 14SG

If you are looking for the right transmitter for your RC plane, you might want to consider the Futaba T14SG. This radio features two-way telemetry and features 2.4GHz FASSTest technology. It also works with virtually all 2.4GHz Futaba air receivers. You can use the T14SG to transmit telemetry and control data while you fly your model. It supports flybarless gyro support. It also comes without a charger, so you’ll have to purchase one separately.

The Futaba 14SG is a professional-grade radio system that has full functionality. It comes with a transmitter and receiver case. You’ll also receive a Futaba charger and manual. All of the parts in this transmitter are in excellent condition. Even if you’re flying a beginner, the Futaba 14SG is perfect for you. Just make sure you use the Futaba 14SG battery charger for best results.

Another great option is a Futaba 6J transmitter. This radio has 6 channels and FHSS technology for trouble-free flights. This transmitter is designed for the budget-minded RC pilot. It has built-in monitors for vital flight data such as altitude, temperature, and RPM. The transmitter also comes with advanced features like variometer and telemetry. If you want to make the best decisions about your RC plane, the Futaba 6J is a great choice.

Flysky i6X

The Flysky i6X is an entry-level RC transmitter with great range and features. The i6X comes with a built-in transmitter and receiver. The FS-i6X has six channel and has a power input and two 3-pin connectors. It also has a signal pin that must be shorted to ground to enable it to operate. This is the same transmitter and receiver used by the Flysky i6X, and can be controlled by the iBUS protocol.

The FS-i6S provides up to 10 channels, but it lacks trim buttons. The latest i6X, the FS-i8 and the FS-i10, both offer backward compatibility and feature a large touch-screen. This version also weighs a bit more than the i6S. For those who want more features in a compact transmitter, there’s also the FS-i8.

The Flysky i6X has a 2.4 GHz transmitter and a pre-bound receiver. It comes with a USB cable for firmware updates and a large backlit LCD display. The transmitter features an on-board memory for flight data and can switch from fixed wing to helicopter mode. There’s even a trainer port. There’s no reason not to give this new RC plane a try.

If you’re not ready for a full-fledged RC plane, then the i6X is an excellent choice for the beginner. With its micro design, this is an excellent beginner plane. With this rc airplane, you’ll enjoy flying and have fun. It’s an affordable way to get started. There’s no need to be an expert to enjoy the fun of remote-controlled plane flying!

Horizon Hobby

Bind-N-FlyTM or BNF is a registered trademark for a specific type of Ready-to-Fly (RTF) RC airplane. This type of aircraft uses crystal-free DSM radio technology. Each BNF model comes with a transmitter and receiver. You’ll also need to purchase a transmitter compatible with the Bind-N-Fly model’s radio system.

BNF technology is an important aspect of many Horizon Hobby products. Some BNF aircraft are compatible with Spektrum radios, while others may not. RF transmitters with multi-model memory are also available, but they are more expensive. However, most of these planes will also work with good DSM transmitters. If you are looking for a BNF transmitter, be sure to check with the manufacturer before you buy.

The most popular BNF model is the Vapor, a slow trainer plane that can be flown indoors and in small spaces. The sensor assisted flight envelope protects against a loss of control and is great for first-timers. In addition, the Cub is telemetry-capable and has Smart components. Lastly, BNF allows for use of a DSM2 radio with any Horizon Hobby model.

About The Author

Wendy Lee is a pop culture ninja who knows all the latest trends and gossip. She's also an animal lover, and will be friends with any creature that crosses her path. Wendy is an expert writer and can tackle any subject with ease. But most of all, she loves to travel - and she's not afraid to evangelize about it to anyone who'll listen! Wendy enjoys all kinds of Asian food and cultures, and she considers herself a bit of a ninja when it comes to eating spicy foods.